Part 1 · section 1
Part 1
VERY COMPREHENSIVE GENERAL EDUCATION COVERAGE FOR THE LET/LEPT
The outline below follows the ten General Education curriculum areas in the Enhanced Table of Specifications amended through PRC Board Resolution No. 11, series of 2025, covering elementary and secondary examinees. The amendment integrates the Philippine Professional Standards for Teachers (PPST).
Read this distinction carefully: The subject areas, weights, and broad learning outcomes come from the TOS. The detailed topics below are an expanded review checklist developed around those outcomes.
OFFICIAL GENERAL EDUCATION DISTRIBUTION
| Curriculum area | Weight within Gen Ed | Items |
|---|---|---|
| 1. Purposive Communication in English | 10% | 15 |
| 2. Malayuning Komunikasyon sa Wikang Filipino | 10% | 15 |
| 3. Readings in Philippine History and Society | 10% | 15 |
| 4. The Life and Works of Rizal | 10% | 15 |
| 5. The Contemporary World | 10% | 15 |
| 6. Art Appreciation | 10% | 15 |
| 7. Science and Technology | 10% | 15 |
| 8. Mathematics | 10% | 15 |
| 9. Ethics | 10% | 15 |
| 10. Understanding the Self | 10% | 15 |
| TOTAL | 100% | 150 |
PURPOSIVE COMMUNICATION IN ENGLISHA. FOUNDATIONS OF COMMUNICATION — COMPREHENSIVE REVIEW NOTES
Scope: These notes expand the Foundations of Communication topics in your review outline. The 10% allocation applies to the entire Purposive Communication in English area, including its other topics.
1. NATURE OF COMMUNICATION
Communication is the process of creating, exchanging, and interpreting messages to develop meaning within a particular context.
Communication involves more than transmitting information.
- A message may reach another person without being understood.
- Understanding depends on language, experience, context, attention, and interpretation.
- Effective communication requires checking whether the intended meaning was understood.
Purposive communication is communication deliberately shaped by a specific purpose, audience, and situation.
- A teacher explains to develop understanding.
- A student writes a proposal to obtain approval.
- A community leader issues instructions to coordinate action.
- A job applicant writes a letter to demonstrate suitability for a position.
Essential characteristics
Communication is a process.
- It consists of connected actions rather than one isolated act.
- Earlier messages influence later responses.
- Meaning may become clearer through explanation, questioning, and feedback.
Communication is dynamic.
- Messages and responses change as an interaction develops.
- Communicators adjust their wording, tone, pace, or examples based on reactions.
Communication is contextual.
- Meaning depends partly on where, when, why, and between whom communication occurs.
- “Please see me afterward” may mean something different when said by a friend, teacher, or supervisor.
Communication is symbolic.
- People use words, gestures, images, sounds, and other symbols to represent ideas.
- Symbols acquire meaning through shared conventions and use.
- The same symbol can have different meanings across communities.
Communication involves interpretation.
- Receivers actively construct meaning.
- They use prior knowledge, expectations, emotions, and cultural experience.
- A sender’s intention does not automatically determine a receiver’s understanding.
Communication may be intentional or unintentional.
- A prepared speech is intentional.
- A facial expression may communicate irritation without deliberate intent.
- Silence or delayed replies can be interpreted as messages, although their meaning should not be assumed without context.
Communication can be transactional.
- In many interactions, people send and receive messages simultaneously.
- A speaker talks while observing the listener’s facial expressions and posture.
- Participants continually influence one another.
Communication has content and relationship dimensions.
- Content dimension: the information conveyed.
- Relationship dimension: what the message suggests about the relationship between participants.
- “Submit the report today” communicates a deadline, while its tone may suggest respect, urgency, or hostility.
Communication is irreversible.
- A message cannot be made never to have occurred.
- An apology, correction, or clarification can address its effects.
- Online messages may remain accessible through screenshots, forwarding, or archives.
Communication is unrepeatable in its exact context.
- Repeating the same words does not reproduce the original interaction.
- Participants’ knowledge, emotions, and circumstances may already have changed.
Communication does not always produce agreement.
- People can understand each other accurately and still disagree.
- Effective communication allows disagreement to be expressed clearly and respectfully.
Important distinctions
Communication versus transmission
- Transmission concerns sending a message.
- Communication also involves interpretation and meaning-making.
Intention versus impact
- Intention is what the sender meant to accomplish.
- Impact is what the message actually caused or communicated to others.
- Responsible communicators consider both.
Effective versus efficient communication
- Effective: achieves the intended communicative purpose.
- Efficient: uses appropriate time and resources.
- An extremely brief instruction may be efficient but ineffective if essential details are missing.
2. PURPOSES AND FUNCTIONS OF COMMUNICATION
Purpose refers to what a communicator intends to accomplish.
Function refers to the role communication performs in an interaction.
One message may serve several purposes or functions.
Informing
Provides facts, explanations, descriptions, or updates.
Answers questions such as what, who, when, where, why, and how.
Requires accuracy, organization, and relevant detail.
Example: Announcing the date, venue, and requirements of an examination.
Instructing or directing
Explains how to perform a task or what action is expected.
Requires clear steps, conditions, deadlines, and expected outcomes.
Example: Explaining how students should complete and submit an activity.
Instructions are easier to follow when:
- Actions appear in logical order.
- Each step uses a clear action verb.
- Unfamiliar terms are explained.
- Understanding is checked.
Persuading
Attempts to influence beliefs, attitudes, judgments, or actions.
Uses reasons, evidence, credibility, and appropriate appeals.
Example: Encouraging community members to reduce plastic waste.
Ethical persuasion:
- Presents reliable information.
- Represents alternatives fairly.
- Respects the audience’s freedom to decide.
Manipulation may involve deception, concealed motives, or exploitation of vulnerability.
Expressing feelings and attitudes
Communicates emotions, preferences, reactions, or concerns.
Example: Expressing appreciation for a colleague’s assistance.
Constructive emotional expression identifies feelings without unnecessary personal attacks.
- Constructive: “I am concerned because the instructions changed after submission.”
- Accusatory: “You always make everything difficult.”
Building and maintaining relationships
Establishes connection, trust, belonging, and cooperation.
Includes greetings, supportive messages, apologies, and expressions of concern.
Example: Asking a new classmate how they are adjusting.
Phatic communication primarily establishes or maintains social contact.
- Examples: “Good morning,” “How are you?” and brief social conversation.
Regulating behavior
Establishes expectations, rules, boundaries, or procedures.
Example: Reminding participants to mute microphones when not speaking.
Regulation can occur through written policies, spoken directions, or nonverbal cues.
Motivating
Encourages effort, persistence, confidence, or participation.
Example: Giving specific feedback that helps a learner recognize improvement.
Motivation is more constructive when it includes realistic support and achievable next steps.
Entertaining
Provides enjoyment, amusement, or aesthetic experience.
Example: Storytelling, humorous speeches, performances, and creative presentations.
Entertainment remains subject to ethical considerations, including respect and accuracy when factual claims are made.
Requesting and obtaining information
Seeks clarification, assistance, permission, or resources.
Example: Asking which documents are required for an application.
Effective requests explain what is needed and provide enough context for an appropriate response.
Negotiating and resolving conflict
Clarifies differences and seeks workable arrangements.
Requires listening, explanation, respectful disagreement, and attention to shared interests.
Example: Agreeing on a revised division of responsibilities in a group project.
Developing identity and participation
Expresses personal, professional, cultural, or group identity.
Enables participation in classroom, workplace, community, and civic life.
Example: Explaining one’s position during a community consultation.
3. THE COMMUNICATION PROCESS
A. Sender or source
The sender initiates or contributes a message.
A sender may be an individual, group, organization, or institution.
Responsibilities include:
- Establishing a clear purpose.
- Selecting relevant content.
- Considering the audience.
- Choosing appropriate language and channels.
- Checking factual accuracy.
In an ongoing conversation, participants alternate or combine sender and receiver roles.
B. Message
The message is the content communicated through words, images, sounds, behavior, or combinations of these.
It can include:
- Facts and ideas.
- Questions and instructions.
- Feelings and attitudes.
- Requests and arguments.
Explicit meaning: directly stated.
Implicit meaning: suggested and inferred from context.
Example: “The room is getting warm” may simply describe temperature or indirectly request that a window be opened.
C. Encoding
Encoding is converting ideas or feelings into communicable symbols.
Examples:
- Turning an explanation into spoken words.
- Representing data in a graph.
- Writing instructions in a memorandum.
Encoding is influenced by:
- Language proficiency.
- Subject knowledge.
- Cultural background.
- Emotional state.
- Assumptions about the audience.
Encoding problem: A teacher uses unexplained technical terms with beginners.
D. Channel
The channel is the route or means through which a message travels.
Examples:
- Face-to-face conversation.
- Telephone call.
- Printed letter.
- Email.
- Video conference.
- Learning platform.
- Social media.
Channel selection should consider:
- Urgency.
- Complexity.
- Need for immediate feedback.
- Need for a permanent record.
- Privacy and sensitivity.
- Accessibility.
- Audience access and preferences.
A complex or sensitive issue may benefit from discussion followed by written documentation.
A routine reminder may be communicated effectively through a short written message.
E. Receiver
The receiver is the intended or actual recipient of a message.
Receivers are active interpreters rather than passive containers.
Their interpretation depends on:
- Knowledge and experience.
- Language ability.
- Attention.
- Expectations.
- Emotions.
- Cultural assumptions.
The actual audience may be larger than intended when messages are forwarded or shared.
F. Decoding
Decoding is interpreting the symbols in a message.
Examples:
- Reading and interpreting an email.
- Understanding a spoken explanation.
- Interpreting a diagram or gesture.
Decoding problem: A receiver understands the words literally but misses sarcasm.
Differences between encoding and decoding can cause misunderstanding even when the message is delivered successfully.
G. Feedback
Feedback is a response that gives information about how a message was received or understood.
It may be:
- Verbal: “Could you explain the second step?”
- Nonverbal: a puzzled expression.
- Written: an email response.
- Behavioral: performing the requested action.
Feedback can be immediate or delayed.
It helps communicators:
- Check understanding.
- Correct errors.
- Adjust explanations.
- Assess whether a purpose was achieved.
A nod or “yes” does not always prove understanding.
More reliable checks include:
- Asking the receiver to paraphrase.
- Requesting a demonstration.
- Asking a specific application question.
Closed-loop communication includes an explicit confirmation and verification.
- Sender gives an instruction.
- Receiver repeats or summarizes it.
- Sender confirms or corrects the interpretation.
H. Context
Context includes the circumstances that shape communication.
Physical context: location, lighting, seating, sound, and surroundings.
Temporal context: timing, duration, deadlines, and previous events.
Social context: roles, relationships, status, and group expectations.
Psychological context: emotions, attitudes, and mental readiness.
Cultural context: shared practices, values, norms, and meanings.
Institutional context: school rules, workplace procedures, and organizational expectations.
The same words can convey different meanings in different contexts.
I. Noise
Noise is any interference that disrupts the creation, transmission, reception, or interpretation of a message.
Noise does not refer only to unwanted sound.
Physical noise: construction sounds or poor visibility.
Physiological noise: fatigue, pain, or temporary illness affecting participation.
Psychological noise: anxiety, anger, prejudice, or preoccupation.
Semantic noise: unfamiliar words, ambiguous expressions, or unexplained jargon.
Technological noise: unstable connection, microphone failure, or corrupted files.
Reducing noise improves the opportunity for understanding but does not guarantee agreement.
Applied example
A teacher posts an assignment in a class platform.
- Sender: teacher.
- Message: assignment instructions.
- Encoding: wording, formatting, and attached examples.
- Channel: class platform.
- Receiver: students.
- Decoding: students’ interpretation of the requirements.
- Feedback: questions, confirmations, and submitted work.
- Context: course expectations, prior lessons, and deadlines.
- Noise: inaccessible attachment, unclear wording, or internet interruption.
4. BASIC MODELS OF COMMUNICATION
Linear model
Presents communication mainly as a one-way flow from sender to receiver.
Useful for examining message transmission.
Immediate feedback is not central to the model.
Example: A recorded announcement played to an audience.
Limitation: gives limited attention to shared meaning-making and simultaneous responses.
Interactional model
Presents communication as an exchange in which participants alternate sender and receiver roles.
Includes feedback.
Recognizes the influence of experience and context.
Example: An email inquiry followed by a response.
Transactional model
Presents participants as simultaneous communicators.
Meaning develops through interaction.
Includes verbal messages, nonverbal responses, relationships, and context.
Example: A classroom discussion in which the teacher adjusts explanations while observing students’ reactions.
Important distinction
These are models for analyzing communication.
Real interactions may contain features represented by more than one model.
5. VERBAL AND NONVERBAL COMMUNICATION
Verbal communication
Uses words and language to convey meaning.
Includes both:
- Oral communication: spoken language.
- Written communication: language represented in writing.
Verbal does not mean spoken only.
Word choice should match purpose, audience, and situation.
Ambiguous, unfamiliar, or overly technical language can weaken understanding.
Nonverbal communication
Conveys meaning through features other than words alone.
Can communicate emotion, attitude, emphasis, relationship, and interactional expectations.
Nonverbal cues should be interpreted in context.
A single cue is insufficient evidence of a person’s honesty, intention, or emotional state.
Major forms
Kinesics: body movement
- Gestures, posture, facial expressions, and body orientation.
- Examples: waving, leaning forward, or pointing.
Oculesics: eye behavior
- Eye contact, gaze direction, and patterns of looking.
- Meanings vary across individuals, cultures, and situations.
- Limited eye contact does not automatically indicate dishonesty or disrespect.
Proxemics: use of space
- Physical distance, seating arrangements, and personal space.
- Comfortable distances vary by relationship and cultural expectations.
Haptics: touch
- Handshakes, supportive contact, and other forms of touch.
- Interpretation depends on relationship, consent, culture, and setting.
Chronemics: use of time
- Punctuality, waiting, response time, and allocation of speaking time.
- A delayed response can have several explanations and should not automatically be interpreted as rejection.
Vocalics or paralanguage: qualities of voice
- Pitch, volume, rate, intonation, pauses, and voice quality.
- The same words can communicate different attitudes through different delivery.
Appearance and artifacts
- Clothing, accessories, uniforms, and objects associated with identity or role.
- Appearance can influence impressions but does not reliably establish competence or character.
Environment
- Room arrangement, lighting, background, and other features of a setting.
- A circular seating arrangement may support discussion.
Silence
- May communicate reflection, uncertainty, respect, resistance, or discomfort.
- Interpretation requires contextual evidence.
Functions of nonverbal behavior
Repeating: pointing toward an exit while saying, “Go that way.”
Complementing: smiling while expressing appreciation.
Accenting: stressing a key word through vocal emphasis.
Substituting: nodding instead of saying “yes.”
Regulating: raising a hand to request a turn.
Contradicting: saying “I’m fine” while displaying visible distress.
Common misconception
There is no universal rule that words always account for only a tiny percentage of meaning.
The contribution of words, tone, and visible behavior depends on the task and context.
Precise instructions, mathematical explanations, and written policies depend heavily on linguistic content.
6. ORAL, WRITTEN, VISUAL, AND MULTIMODAL COMMUNICATION
Oral communication
Uses spoken language.
Examples: discussions, interviews, speeches, telephone calls, and presentations.
Strengths:
- Can provide immediate clarification.
- Allows adjustment based on reactions.
- Carries vocal cues.
Limitations:
- May be forgotten or misremembered.
- Can be affected by noise and speaking anxiety.
- Does not automatically provide a permanent record.
Effective practices:
- Organize ideas.
- Speak intelligibly.
- Use appropriate pace and volume.
- Pause for processing.
- Invite questions.
Written communication
Uses written language.
Examples: emails, reports, notices, letters, and instructions.
Strengths:
- Can be reviewed and revised.
- Provides a record when retained.
- Supports detailed information.
Limitations:
- Feedback may be delayed.
- Tone may be misinterpreted.
- Poor organization can obscure meaning.
Effective practices:
- State the purpose early.
- Use precise wording.
- Organize information logically.
- Identify required actions and deadlines.
- Proofread before sending.
Visual communication
Uses images, graphics, signs, diagrams, layout, and spatial relationships.
Examples: maps, charts, posters, photographs, and infographics.
Strengths:
- Can show patterns and relationships efficiently.
- Can make complex information easier to inspect.
Limitations:
- Poor design can mislead.
- Symbols may be unfamiliar.
- Images may be inaccessible without alternatives.
Effective practices:
- Label clearly.
- Use readable text and appropriate contrast.
- Represent data proportionately.
- Provide text alternatives where needed.
- Avoid relying on color alone to distinguish information.
Multimodal communication
Combines two or more modes of meaning-making.
Modes may include linguistic, visual, aural, gestural, and spatial resources.
Examples:
- A video combining narration, captions, images, and music.
- A classroom presentation using speech, diagrams, and gestures.
Multimodal versus multimedia
- Multimodal concerns different modes of meaning.
- Multimedia commonly concerns the combination of media formats or technologies.
- The concepts overlap but are not identical.
Effective multimodal design:
- Gives each component a clear purpose.
- Coordinates words and visuals.
- Avoids unnecessary competing information.
- Includes captions, transcripts, or descriptions as appropriate.
- Considers the audience’s devices and connectivity.
7. LEVELS AND SETTINGS OF COMMUNICATION
Intrapersonal communication
Communication within oneself.
Includes self-talk, reflection, internal questioning, and mental rehearsal.
Examples:
- Planning what to say.
- Evaluating one’s response after a disagreement.
Can support decision-making and emotional regulation.
Unexamined assumptions or repetitive negative self-talk can distort judgment.
Interpersonal communication
Communication between people within a relationship or interaction.
Often illustrated through two-person exchanges.
Examples: consultation, conversation, counseling, and interviewing.
Involves:
- Listening.
- Turn-taking.
- Relationship management.
- Verbal and nonverbal interpretation.
Digital interaction can also be interpersonal.
Group communication
Interaction among people working toward shared purposes.
Examples: project teams, committees, and study groups.
Requires:
- Shared goals.
- Clear responsibilities.
- Participation.
- Coordination.
- Decision-making procedures.
Common problems:
- Unequal participation.
- Unclear roles.
- Dominance by a few members.
- Personal conflict.
- Groupthink: pressure for agreement that weakens critical evaluation.
Better practices:
- Invite alternative views.
- Clarify decisions and responsibilities.
- Record agreed actions.
Public communication
A speaker addresses an audience.
Examples: lectures, speeches, briefings, and campaign presentations.
Usually involves more planned organization and audience adaptation.
Feedback may include questions, applause, facial expressions, or audience behavior.
Public communication can occur online.
Mass communication
Messages are distributed through media to large, dispersed audiences.
Examples: television news, radio broadcasts, newspapers, and widely distributed digital content.
Often involves institutional production or technological distribution.
Feedback may be delayed, indirect, or digitally mediated.
Digital platforms can combine mass communication with interpersonal and group interaction.
Useful distinction
A private message to one student is interpersonal communication.
A collaborative class discussion is group communication.
A teacher’s lecture is public communication.
An educational broadcast distributed widely is mass communication.
8. FORMAL AND INFORMAL COMMUNICATION
Formal communication
Follows recognized institutional roles, procedures, or channels.
Examples:
- Official memoranda.
- Application letters.
- Administrative reports.
- Scheduled meetings.
Usually requires attention to documentation and professional conventions.
Formal communication can be clear and conversational; it does not require unnecessarily complicated language.
Informal communication
Develops through everyday social interaction and unofficial channels.
Examples:
- Casual conversations.
- Peer exchanges.
- Unofficial group chats.
Can support trust, cooperation, and rapid information exchange.
Risks include incomplete information, rumor, and unclear accountability.
Organizational directions
Downward: from higher organizational levels to lower levels.
- Example: a principal communicates procedures to teachers.
Upward: from lower levels to higher levels.
- Example: teachers submit concerns to school administrators.
Horizontal or lateral: among people at comparable organizational levels.
- Example: teachers coordinate a shared activity.
Diagonal: across different departments and organizational levels.
- Example: a teacher coordinates directly with a district technology officer.
Grapevine communication